MySQL高可用方案MHA在线切换的步骤及原理
BAT 批处理程序 2017-05-22
在日常工作中，会碰到如下的场景，如mysql数据库升级，主服务器硬件升级等，这个时候就需要将写操作切换到另外一台服务器上，那么如何进行在线切换呢？同时，要求切换过程短，对业务的影响比较小。
MHA就提供了这样一种优雅的方式，只会堵塞业务0.5~2s的时间，在这段时间内，业务无法读取和写入。
集群信息
角色 IP地址 ServerID 类型
Master 192.168.244.10 1 写入
Candicate master 192.168.244.20 2 读
Slave 192.168.244.30 3 读
Monitor host 192.168.244.40 监控集群组
MHA具体的搭建步骤和原理，可参考另外一篇博客：
MySQL高可用方案MHA的部署和原理
在线切换的步骤
1. 关闭MHA监控
# masterha_stop --conf=/etc/masterha/app1.cnf
2. 在线切换
# /usr/local/bin/masterha_master_switch --conf=/etc/masterha/app1.cnf --master_state=alive --new_master_host=192.168.244.20 --new_master_port=3306 --orig_master_is_new_slave --running_updates_limit=10000
其中，
--orig_master_is_new_slave是将原master切换为新主的slave，默认情况下，是不添加的。
--running_updates_limit默认为1s，即如果主从延迟时间（Seconds_Behind_Master），或master show processlist中dml操作大于1s，则不会执行切换。
在线切换的输出
Tue Apr 11 15:28:32 2017 - [info] MHA::MasterRotate version 0.56. Tue Apr 11 15:28:32 2017 - [info] Starting online master switch.. Tue Apr 11 15:28:32 2017 - [info] Tue Apr 11 15:28:32 2017 - [info] * Phase 1: Configuration Check Phase.. Tue Apr 11 15:28:32 2017 - [info] Tue Apr 11 15:28:32 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping. Tue Apr 11 15:28:32 2017 - [info] Reading application default configuration from /etc/masterha/app1.cnf.. Tue Apr 11 15:28:32 2017 - [info] Reading server configuration from /etc/masterha/app1.cnf.. Tue Apr 11 15:28:34 2017 - [info] GTID failover mode = 0 Tue Apr 11 15:28:34 2017 - [info] Current Alive Master: 192.168.244.10(192.168.244.10:3306) Tue Apr 11 15:28:34 2017 - [info] Alive Slaves: Tue Apr 11 15:28:34 2017 - [info] 192.168.244.20(192.168.244.20:3306) Version=5.6.31-log (oldest major version between slaves) log -bin:enabledTue Apr 11 15:28:34 2017 - [info] Replicating from 192.168.244.10(192.168.244.10:3306) Tue Apr 11 15:28:34 2017 - [info] Primary candidate for the new Master (candidate_master is set) Tue Apr 11 15:28:34 2017 - [info] 192.168.244.30(192.168.244.30:3306) Version=5.6.31-log (oldest major version between slaves) log -bin:enabledTue Apr 11 15:28:34 2017 - [info] Replicating from 192.168.244.10(192.168.244.10:3306) It is better to execute FLUSH NO_WRITE_TO_BINLOG TABLES on the master before switching. Is it ok to execute on 192.168.244.10(192.168 .244.10:3306)? (YES/no): yesTue Apr 11 15:28:47 2017 - [info] Executing FLUSH NO_WRITE_TO_BINLOG TABLES. This may take long time.. Tue Apr 11 15:28:47 2017 - [info] ok. Tue Apr 11 15:28:47 2017 - [info] Checking MHA is not monitoring or doing failover.. Tue Apr 11 15:28:47 2017 - [info] Checking replication health on 192.168.244.20.. Tue Apr 11 15:28:47 2017 - [info] ok. Tue Apr 11 15:28:47 2017 - [info] Checking replication health on 192.168.244.30.. Tue Apr 11 15:28:47 2017 - [info] ok. Tue Apr 11 15:28:47 2017 - [info] 192.168.244.20 can be new master. Tue Apr 11 15:28:47 2017 - [info] From: 192.168.244.10(192.168.244.10:3306) (current master) +--192.168.244.20(192.168.244.20:3306) +--192.168.244.30(192.168.244.30:3306) To: 192.168.244.20(192.168.244.20:3306) (new master) +--192.168.244.30(192.168.244.30:3306) +--192.168.244.10(192.168.244.10:3306) Starting master switch from 192.168.244.10(192.168.244.10:3306) to 192.168.244.20(192.168.244.20:3306)? (yes/NO): yes Tue Apr 11 15:29:00 2017 - [info] Checking whether 192.168.244.20(192.168.244.20:3306) is ok for the new master.. Tue Apr 11 15:29:00 2017 - [info] ok. Tue Apr 11 15:29:00 2017 - [info] 192.168.244.10(192.168.244.10:3306): SHOW SLAVE STATUS returned empty result. To check replication filtering rules, temporarily executing CHANGE MASTER to a dummy host.Tue Apr 11 15:29:00 2017 - [info] 192.168.244.10(192.168.244.10:3306): Resetting slave pointing to the dummy host. Tue Apr 11 15:29:00 2017 - [info] ** Phase 1: Configuration Check Phase completed. Tue Apr 11 15:29:00 2017 - [info] Tue Apr 11 15:29:00 2017 - [info] * Phase 2: Rejecting updates Phase.. Tue Apr 11 15:29:00 2017 - [info] Tue Apr 11 15:29:00 2017 - [info] Executing master ip online change script to disable write on the current master: Tue Apr 11 15:29:00 2017 - [info] /usr/local/bin/master_ip_online_change --command=stop --orig_master_host=192.168.244.10 --orig_ma ster_ip=192.168.244.10 --orig_master_port=3306 --orig_master_user='monitor' --orig_master_password='monitor123' --new_master_host=192.168.244.20 --new_master_ip=192.168.244.20 --new_master_port=3306 --new_master_user='monitor' --new_master_password='monitor123' --orig_master_ssh_user=root --new_master_ssh_user=root --orig_master_is_new_slaveTue Apr 11 15:29:00 2017 476501 Set read_only on the new master.. ok. Tue Apr 11 15:29:00 2017 911951 Set read_only=1 on the orig master.. ok. Tue Apr 11 15:29:00 2017 919517 Killing all application threads.. Tue Apr 11 15:29:00 2017 919552 done. Disabling the VIP an old master: 192.168.244.10 SIOCSIFFLAGS: Cannot assign requested address Tue Apr 11 15:29:00 2017 - [info] ok. Tue Apr 11 15:29:00 2017 - [info] Locking all tables on the orig master to reject updates from everybody (including root): Tue Apr 11 15:29:00 2017 - [info] Executing FLUSH TABLES WITH READ LOCK.. Tue Apr 11 15:29:00 2017 - [info] ok. Tue Apr 11 15:29:00 2017 - [info] Orig master binlog:pos is mysql-bin.000016:211. Tue Apr 11 15:29:00 2017 - [info] Waiting to execute all relay logs on 192.168.244.20(192.168.244.20:3306).. Tue Apr 11 15:29:01 2017 - [info] master_pos_wait(mysql-bin.000016:211) completed on 192.168.244.20(192.168.244.20:3306). Executed 0 events.Tue Apr 11 15:29:01 2017 - [info] done. Tue Apr 11 15:29:01 2017 - [info] Getting new master's binlog name and position.. Tue Apr 11 15:29:01 2017 - [info] mysql-bin.000009:211 Tue Apr 11 15:29:01 2017 - [info] All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_ HOST='192.168.244.20', MASTER_PORT=3306, MASTER_LOG_FILE='mysql-bin.000009', MASTER_LOG_POS=211, MASTER_USER='repl', MASTER_PASSWORD='xxx';Tue Apr 11 15:29:01 2017 - [info] Executing master ip online change script to allow write on the new master: Tue Apr 11 15:29:01 2017 - [info] /usr/local/bin/master_ip_online_change --command=start --orig_master_host=192.168.244.10 --orig_m aster_ip=192.168.244.10 --orig_master_port=3306 --orig_master_user='monitor' --orig_master_password='monitor123' --new_master_host=192.168.244.20 --new_master_ip=192.168.244.20 --new_master_port=3306 --new_master_user='monitor' --new_master_password='monitor123' --orig_master_ssh_user=root --new_master_ssh_user=root --orig_master_is_new_slaveTue Apr 11 15:29:01 2017 109040 Set read_only=0 on the new master. Enabling the VIP 192.168.244.188 on the new master: 192.168.244.20 Tue Apr 11 15:29:01 2017 - [info] ok. Tue Apr 11 15:29:01 2017 - [info] Tue Apr 11 15:29:01 2017 - [info] * Switching slaves in parallel.. Tue Apr 11 15:29:01 2017 - [info] Tue Apr 11 15:29:01 2017 - [info] -- Slave switch on host 192.168.244.30(192.168.244.30:3306) started, pid: 17651 Tue Apr 11 15:29:01 2017 - [info] Tue Apr 11 15:29:02 2017 - [info] Log messages from 192.168.244.30 ... Tue Apr 11 15:29:02 2017 - [info] Tue Apr 11 15:29:01 2017 - [info] Waiting to execute all relay logs on 192.168.244.30(192.168.244.30:3306).. Tue Apr 11 15:29:01 2017 - [info] master_pos_wait(mysql-bin.000016:211) completed on 192.168.244.30(192.168.244.30:3306). Executed 0 events.Tue Apr 11 15:29:01 2017 - [info] done. Tue Apr 11 15:29:01 2017 - [info] Resetting slave 192.168.244.30(192.168.244.30:3306) and starting replication from the new master 1 92.168.244.20(192.168.244.20:3306)..Tue Apr 11 15:29:01 2017 - [info] Executed CHANGE MASTER. Tue Apr 11 15:29:01 2017 - [info] Slave started. Tue Apr 11 15:29:02 2017 - [info] End of log messages from 192.168.244.30 ... Tue Apr 11 15:29:02 2017 - [info] Tue Apr 11 15:29:02 2017 - [info] -- Slave switch on host 192.168.244.30(192.168.244.30:3306) succeeded. Tue Apr 11 15:29:02 2017 - [info] Unlocking all tables on the orig master: Tue Apr 11 15:29:02 2017 - [info] Executing UNLOCK TABLES.. Tue Apr 11 15:29:02 2017 - [info] ok. Tue Apr 11 15:29:02 2017 - [info] Starting orig master as a new slave.. Tue Apr 11 15:29:02 2017 - [info] Resetting slave 192.168.244.10(192.168.244.10:3306) and starting replication from the new master 1 92.168.244.20(192.168.244.20:3306)..Tue Apr 11 15:29:02 2017 - [info] Executed CHANGE MASTER. Tue Apr 11 15:29:02 2017 - [info] Slave started. Tue Apr 11 15:29:02 2017 - [info] All new slave servers switched successfully. Tue Apr 11 15:29:02 2017 - [info] Tue Apr 11 15:29:02 2017 - [info] * Phase 5: New master cleanup phase.. Tue Apr 11 15:29:02 2017 - [info] Tue Apr 11 15:29:02 2017 - [info] 192.168.244.20: Resetting slave info succeeded. Tue Apr 11 15:29:02 2017 - [info] Switching master to 192.168.244.20(192.168.244.20:3306) completed successfully.
MHA在线切换的原理
1. 检查当前的配置信息及主从服务器的信息
包括读取MHA的配置文件/etc/masterha/app1.cnf及检查当前slave的健康状态
2. 阻止对当前master的更新
主要通过如下步骤：
1> 等待1.5s（$time_until_kill_threads*100ms），等待当前连接断开。
2> 执行 read_only=1，阻止新的DML操作
3> 等待0.5s，等待当前DML操作完成。
4> kill掉所有连接。
5> FLUSH NO_WRITE_TO_BINLOG TABLES
6> FLUSH TABLES WITH READ LOCK
3. 等待新master执行完所有的relay log
Waiting to execute all relay logs on 192.168.244.20(192.168.244.20:3306)..
4. 将新master的read_only设置为off，并添加VIP
5. slave切换到新master上。
1> 等待slave（192.168.244.30）应用完原主从复制产生的relay log，然后执行change master操作切换到新master上。
2> 释放原master上加的锁。
3> 因masterha_master_switch命令行中带有--orig_master_is_new_slave参数，故原master也切换为新master的从。
6. 清理新master的相关信息。
主要是执行了reset slave all操作，清除之前的复制信息。
MHA在线切换需满足的条件
MHA在执行在线切换之前，会判断当前的主从复制信息，只有满足了以下条件，才能执行切换动作：
1. 所有SLAVE的IO线程和SQL线程都在运行。
2. 所有slave的Seconds_Behind_Master小于或等于running_updates_limit的值，该参数如果没有显示指定的话，则默认为1s
3. 在master上，通过show processlist输出，没有一个DML操作的时间大于running_updates_limit的值。
在线切换时，打开general log，各个服务器的操作信息
注：在执行masterha_master_switch命令时，会有两次确认操作
1. It is better to execute FLUSH NO_WRITE_TO_BINLOG TABLES on the master before switching. Is it ok to execute on 192.168.244.10(192.168.244.10:3306)? (YES/no):
2. Starting master switch from 192.168.244.10(192.168.244.10:3306) to 192.168.244.20(192.168.244.20:3306)? (yes/NO):
以下输出中间都有两次空白，其中第一次空白之前的输出对应第一次确认之前，第二次之前的输出对应第二次确认之前。
原master 192.168.244.10
170412 16:52:38 23 Connect monitor@node4 on
23 Query set autocommit=1
23 Query SELECT CONNECTION_ID() AS Value
170412 16:52:39 24 Connect monitor@node4 on
24 Query set autocommit=1
24 Query SELECT CONNECTION_ID() AS Value
24 Query SET wait_timeout=86400
24 Query SELECT @@global.server_id As Value
24 Query SELECT VERSION() AS Value
24 Query SELECT @@global.gtid_mode As Value
24 Query SHOW GLOBAL VARIABLES LIKE 'log_bin'
24 Query SHOW MASTER STATUS
24 Query SELECT @@global.datadir AS Value
24 Query SELECT @@global.slave_parallel_workers AS Value
24 Query SHOW SLAVE STATUS
24 Query SELECT @@global.read_only As Value
24 Query SELECT @@global.relay_log_purge As Value
170412 16:54:06 24 Query FLUSH NO_WRITE_TO_BINLOG TABLES
24 Query SELECT GET_LOCK('MHA_Master_High_Availability_Monitor', '0') AS Value
24 Query SHOW PROCESSLIST
170412 16:55:51 24 Query SHOW SLAVE STATUS
24 Query CHANGE MASTER TO MASTER_HOST='dummy_host'
170412 16:55:52 24 Query SHOW SLAVE STATUS
24 Query RESET SLAVE /*!50516 ALL */
24 Query SELECT RELEASE_LOCK('MHA_Master_High_Availability_Monitor') As Value
24 Quit
25 Connect monitor@node4 on
25 Query set autocommit=1
25 Query SELECT CONNECTION_ID() AS Value
25 Query SET sql_log_bin=0
25 Query SHOW PROCESSLIST
25 Query SELECT @@global.read_only As Value
25 Query SET GLOBAL read_only=1
25 Query SELECT @@global.read_only As Value
25 Query SHOW PROCESSLIST
25 Query SET sql_log_bin=1
25 Quit
26 Connect monitor@node4 on
26 Query set autocommit=1
26 Query SELECT CONNECTION_ID() AS Value
26 Query SET wait_timeout=86400
26 Query FLUSH TABLES WITH READ LOCK
26 Query SHOW MASTER STATUS
170412 16:55:53 26 Query UNLOCK TABLES
26 Query CHANGE MASTER TO MASTER_HOST = '192.168.244.20' MASTER_USER = 'repl' MASTER_PASSWORD = <secret> MASTE
R_PORT = 3306 MASTER_LOG_FILE = 'mysql-bin.000010' MASTER_LOG_POS = 120 26 Query SET GLOBAL relay_log_purge=0
26 Query START SLAVE
27 Connect Out [email protected]:3306
26 Query SHOW SLAVE STATUS
26 Query SELECT RELEASE_LOCK('MHA_Master_High_Availability_Failover') As Value
26 Quit 新master 192.168.244.20
170412 16:52:38 23 Connect monitor@node4 on
23 Query set autocommit=1
23 Query SELECT CONNECTION_ID() AS Value
170412 16:52:39 24 Connect monitor@node4 on
24 Query set autocommit=1
24 Query SELECT CONNECTION_ID() AS Value
24 Query SET wait_timeout=86400
24 Query SELECT @@global.server_id As Value
24 Query SELECT VERSION() AS Value
24 Query SELECT @@global.gtid_mode As Value
24 Query SHOW GLOBAL VARIABLES LIKE 'log_bin'
24 Query SHOW MASTER STATUS
24 Query SELECT @@global.datadir AS Value
24 Query SELECT @@global.slave_parallel_workers AS Value
24 Query SHOW SLAVE STATUS
24 Query SELECT @@global.read_only As Value
24 Query SELECT @@global.relay_log_purge As Value
24 Query SELECT @@global.relay_log_info_repository AS Value
24 Query SELECT @@global.datadir AS Value
24 Query SELECT @@global.relay_log_info_file AS Value
24 Query SHOW SLAVE STATUS
24 Query SELECT Repl_slave_priv AS Value FROM mysql.user WHERE user = 'repl'
170412 16:54:06 24 Query SELECT GET_LOCK('MHA_Master_High_Availability_Failover', '0') AS Value
24 Query SHOW SLAVE STATUS
24 Query SHOW SLAVE STATUS
170412 16:55:52 24 Query SHOW PROCESSLIST
25 Connect monitor@node4 on
25 Query set autocommit=1
25 Query SELECT CONNECTION_ID() AS Value
25 Query SELECT @@global.read_only As Value
25 Query SELECT @@global.read_only As Value
25 Quit
24 Query SHOW SLAVE STATUS
24 Query SELECT MASTER_POS_WAIT('mysql-bin.000017','120',0) AS Result
24 Query STOP SLAVE SQL_THREAD
24 Query SHOW SLAVE STATUS
24 Query SHOW MASTER STATUS
26 Connect monitor@node4 on
26 Query set autocommit=1
26 Query SELECT CONNECTION_ID() AS Value
26 Query SET sql_log_bin=0
26 Query SELECT @@global.read_only As Value
26 Query SET GLOBAL read_only=0
26 Query SET sql_log_bin=1
26 Quit
24 Query SELECT @@global.read_only As Value
27 Connect repl@node3 on
27 Query SELECT UNIX_TIMESTAMP()
27 Query SHOW VARIABLES LIKE 'SERVER_ID'
27 Query SET @master_heartbeat_period= 1799999979520
27 Query SET @master_binlog_checksum= @@global.binlog_checksum
27 Query SELECT @master_binlog_checksum
27 Query SELECT @@GLOBAL.GTID_MODE
27 Query SHOW VARIABLES LIKE 'SERVER_UUID'
27 Query SET @slave_uuid= '8a1093c8-1d00-11e7-954f-000c299a5715'
27 Binlog Dump Log: 'mysql-bin.000010' Pos: 120
170412 16:55:53 28 Connect repl@node1 on
28 Query SELECT UNIX_TIMESTAMP()
28 Query SHOW VARIABLES LIKE 'SERVER_ID'
28 Query SET @master_heartbeat_period= 1799999979520
28 Query SET @master_binlog_checksum= @@global.binlog_checksum
28 Query SELECT @master_binlog_checksum
28 Query SELECT @@GLOBAL.GTID_MODE
28 Query SHOW VARIABLES LIKE 'SERVER_UUID'
24 Query STOP SLAVE
28 Query SET @slave_uuid= '2a6365e0-1d05-11e7-956d-000c29c64704'
28 Binlog Dump Log: 'mysql-bin.000010' Pos: 120
24 Query SHOW SLAVE STATUS
24 Query RESET SLAVE /*!50516 ALL */
24 Query SHOW SLAVE STATUS
24 Query SELECT RELEASE_LOCK('MHA_Master_High_Availability_Failover') As Value
24 Quit slave 192.168.244.30
170412 16:52:37 16 Connect monitor@node4 on
16 Query set autocommit=1
16 Query SELECT CONNECTION_ID() AS Value
170412 16:52:38 17 Connect monitor@node4 on
17 Query set autocommit=1
17 Query SELECT CONNECTION_ID() AS Value
17 Query SET wait_timeout=86400
17 Query SELECT @@global.server_id As Value
17 Query SELECT VERSION() AS Value
17 Query SELECT @@global.gtid_mode As Value
17 Query SHOW GLOBAL VARIABLES LIKE 'log_bin'
17 Query SHOW MASTER STATUS
17 Query SELECT @@global.datadir AS Value
17 Query SELECT @@global.slave_parallel_workers AS Value
17 Query SHOW SLAVE STATUS
17 Query SELECT @@global.read_only As Value
17 Query SELECT @@global.relay_log_purge As Value
17 Query SELECT @@global.relay_log_info_repository AS Value
17 Query SELECT @@global.datadir AS Value
17 Query SELECT @@global.relay_log_info_file AS Value
17 Query SHOW SLAVE STATUS
17 Query SELECT Repl_slave_priv AS Value FROM mysql.user WHERE user = 'repl'
170412 16:54:05 17 Query SELECT GET_LOCK('MHA_Master_High_Availability_Failover', '0') AS Value
17 Query SHOW SLAVE STATUS
17 Query SHOW SLAVE STATUS
170412 16:55:50 17 Query SHOW SLAVE STATUS
170412 16:55:51 17 Query SHOW SLAVE STATUS
17 Query SELECT MASTER_POS_WAIT('mysql-bin.000017','120',0) AS Result
17 Query STOP SLAVE SQL_THREAD
17 Query SHOW SLAVE STATUS
17 Query STOP SLAVE
17 Query STOP SLAVE
17 Query SHOW SLAVE STATUS
17 Query RESET SLAVE
17 Query CHANGE MASTER TO MASTER_HOST = '192.168.244.20' MASTER_USER = 'repl' MASTER_PASSWORD = <secret> MASTE
R_PORT = 3306 MASTER_LOG_FILE = 'mysql-bin.000010' MASTER_LOG_POS = 120 17 Query SET GLOBAL relay_log_purge=0
17 Query START SLAVE
18 Connect Out [email protected]:3306
17 Query SHOW SLAVE STATUS
170412 16:55:52 17 Query SELECT RELEASE_LOCK('MHA_Master_High_Availability_Failover') As Value
17 Quit 参考
《深入浅出MySQL》
相关推荐
elitechen 0喜欢 / 0评论 2020-07-28
herohope 0喜欢 / 0评论 2020-07-19
KFLING 0喜欢 / 0评论 2020-06-13
inhumming 0喜欢 / 0评论 2020-06-10
李高峰 0喜欢 / 0评论 2020-05-25
这些年来 0喜欢 / 0评论 2020-05-25
wiseMale 0喜欢 / 0评论 2020-05-11
ithzhang 0喜欢 / 0评论 2020-04-19
会哭的雨 0喜欢 / 0评论 2020-02-24
xiaojiang0 0喜欢 / 0评论 2020-02-22
康慧欣 0喜欢 / 0评论 2020-02-18
阿亮 0喜欢 / 0评论 2019-12-25
xiaobaif 0喜欢 / 0评论 2019-12-25
xiaoxiangyu 0喜欢 / 0评论 2019-12-23
ShiShuo 0喜欢 / 0评论 2019-12-23
贤冰 0喜欢 / 0评论 2019-12-19
herohope 0喜欢 / 0评论 2019-12-14
achiverhai 0喜欢 / 0评论 2019-12-06
mycosmos 0喜欢 / 0评论 2019-11-04
tangjianft 0喜欢 / 0评论 2019-10-24
小树不倒我不倒 0喜欢 / 0评论 2019-05-13
sqlican 0喜欢 / 0评论 2019-06-28
MySQLLelove 0喜欢 / 0评论 2019-06-28
门门雨 0喜欢 / 0评论 2019-06-28
加油码农 0喜欢 / 0评论 2019-06-27
kevinli 0喜欢 / 0评论 2017-12-22
woshihaiyong 0喜欢 / 0评论 2019-01-14
youngzs 0喜欢 / 0评论 2018-10-01
敏敏张 0喜欢 / 0评论 2018-05-02
mysqllover 0喜欢 / 0评论 2017-11-30
guotao 0喜欢 / 0评论 2017-05-22
slwang00 0喜欢 / 0评论 2017-05-12
quniMdejiangyou 0喜欢 / 0评论 2016-07-05
xushengzhang 0喜欢 / 0评论 2015-04-20
tanyhuan 0喜欢 / 0评论 2015-02-17
vivenwan 0喜欢 / 0评论 2015-02-10
achiverhai 0喜欢 / 0评论 2015-02-10
ncomoon 0喜欢 / 0评论 2015-02-10
SCNUHB 0喜欢 / 0评论 2015-01-27
vivenwan 0喜欢 / 0评论 2014-04-11
boxifeng 0喜欢 / 0评论 2016-06-06
EricaYue 0喜欢 / 0评论 2014-11-17
大连云鹏 0喜欢 / 0评论 2012-06-07
kiddwyl 0喜欢 / 0评论 2019-04-16
MySQLl 0喜欢 / 0评论 2019-04-15
oracleANDmysql 0喜欢 / 0评论 2019-04-11
mysql0 0喜欢 / 0评论 2019-04-09