jackadmi 2014-10-13
按照天嵌官方的《Linux移植之step by step》手册上的方法,做linux2.6.30.4触摸屏驱动程序的移植没有成功,经过一番摸索发现是2.6.30.4没有合适的ADC驱动,所以就着手自己做ADC和触摸屏驱动的移植。
Linux移植之step by step PDF 版下载:http://pan.baidu.com/s/1mgFUvg8
或者
------------------------------------------分割线------------------------------------------
具体下载目录在 /2014年资料/10月/13日/TQ2440触摸屏驱动程序的移植
------------------------------------------分割线------------------------------------------
下面是我解决问题的详细过程:
1.找到天嵌给的linux2.6.30.4的源码,进入drivers/char 目录,把ADC驱动程序的源码抠出来,注意还有那个ADC驱动程序要调用的头文件,我的是直接把头文件加到ADC驱动程序的源码里面,下面是加入头文件修改后的ADC驱动程序的源代码(我把他命名为my_adc.c):
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <mach/regs-clock.h>
#include <plat/regs-timer.h>
#include <plat/regs-adc.h>
#include <mach/regs-gpio.h>
#include <linux/cdev.h>
#include <linux/miscdevice.h>
#ifndef _S3C2410_ADC_H_
#define _S3C2410_ADC_H_
#define ADC_WRITE(ch, prescale) ((ch)<<16|(prescale))
#define ADC_WRITE_GETCH(data) (((data)>>16)&0x7)
#define ADC_WRITE_GETPRE(data) ((data)&0xff)
#endif /* _S3C2410_ADC_H_ */
#undef DEBUG
//#define DEBUG
#ifdef DEBUG
#define DPRINTK(x...) {printk("EmbedSky_adc: " x);}
#else
#define DPRINTK(x...) (void)(0)
#endif
#define DEVICE_NAME "adc"
#define ch_0 0
#define ch_1 1
#define ch_2 2
#define ch_3 3
static void __iomem *base_addr;
typedef struct
{
wait_queue_head_t wait;
int channel;
int prescale;
}ADC_DEV;
DECLARE_MUTEX(ADC_LOCK);
static int ADC_enable = 0;
static ADC_DEV adcdev;
static volatile int ev_adc = 0;
static int adc_data;
static struct clk *adc_clock;
#define ADCCON (*(volatile unsigned long *)(base_addr + S3C2410_ADCCON)) //ADC control
#define ADCTSC (*(volatile unsigned long *)(base_addr + S3C2410_ADCTSC)) //ADC touch screen control
#define ADCDLY (*(volatile unsigned long *)(base_addr + S3C2410_ADCDLY)) //ADC start or Interval Delay
#define ADCDAT0 (*(volatile unsigned long *)(base_addr + S3C2410_ADCDAT0)) //ADC conversion data 0
#define ADCDAT1 (*(volatile unsigned long *)(base_addr + S3C2410_ADCDAT1)) //ADC conversion data 1
#define ADCUPDN (*(volatile unsigned long *)(base_addr + 0x14)) //Stylus Up/Down interrupt status
#define PRESCALE_DIS (0 << 14)
#define PRESCALE_EN (1 << 14)
#define PRSCVL(x) ((x) << 6)
#define ADC_INPUT(x) ((x) << 3)
#define ADC_START (1 << 0)
#define ADC_ENDCVT (1 << 15)
#define START_ADC_AIN(ch, prescale) \
do{ ADCCON = PRESCALE_EN | PRSCVL(prescale) | ADC_INPUT((ch)) ; \
ADCCON |= ADC_START; \
}while(0)
int iSaveADCTSC=0;
static int tq2440_adc_ioctl(
struct inode *inode,
struct file *file,
unsigned int cmd,
unsigned long arg)
{
if (arg > 4)
{
return -EINVAL;
}
switch(cmd)
{
case ch_0:
adcdev.channel=0;
return 0;
case ch_1:
adcdev.channel=1;
return 0;
case ch_2:
adcdev.channel=2;
return 0;
case ch_3:
adcdev.channel=3;
return 0;
default:
return -EINVAL;
}
}
static ssize_t tq2440_adc_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
{
char str[20];
int value;
size_t len;
if (down_trylock(&ADC_LOCK) == 0)
{
ADC_enable = 1;
START_ADC_AIN(adcdev.channel, adcdev.prescale);
iSaveADCTSC=ADCTSC;
ADCTSC=ADCTSC&(~0x1<<2);
ADCCON|=0x01;
while(ADCCON&0x1);
while(!ADCCON&(0x1<<15));
adc_data = ADCDAT0 & 0x3ff;
ADCTSC=iSaveADCTSC;
ev_adc = 0;
DPRINTK("AIN[%d] = 0x%04x, %d\n", adcdev.channel, adc_data, ((ADCCON & 0x80) ? 1:0));
value = adc_data;
sprintf(str,"%5d", adc_data);
copy_to_user(buffer, (char *)&adc_data, sizeof(adc_data));
ADC_enable = 0;
up(&ADC_LOCK);
len = sprintf(str, "%d\n", value);
if (count >= len)
{
int r = copy_to_user(buffer, str, len);
return r ? r : len;
}
else
{
return -1;
}
}
else
{
return -1;
//value = -1;
}
}
static int tq2440_adc_open(struct inode *inode, struct file *filp)
{
init_waitqueue_head(&(adcdev.wait));
adcdev.channel=2;
adcdev.prescale=0xff;
DPRINTK( "ADC opened\n");
return 0;
}
static int tq2440_adc_release(struct inode *inode, struct file *filp)
{
DPRINTK( "ADC closed\n");
return 0;
}
static struct file_operations dev_fops = {
.owner = THIS_MODULE,
.open = tq2440_adc_open,
.ioctl = tq2440_adc_ioctl,
.read = tq2440_adc_read,
.release = tq2440_adc_release,
};
static struct miscdevice misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = DEVICE_NAME,
.fops = &dev_fops,
};
static int __init dev_init(void)
{
int ret;
base_addr=ioremap(S3C2410_PA_ADC,0x20);
if (base_addr == NULL)
{
printk(KERN_ERR "failed to remap register block\n");
return -ENOMEM;
}
adc_clock = clk_get(NULL, "adc");
if (!adc_clock)
{
printk(KERN_ERR "failed to get adc clock source\n");
return -ENOENT;
}
clk_enable(adc_clock);
ADCTSC = 0;
ret = misc_register(&misc);
printk (DEVICE_NAME" initialized\n");
return ret;
}
static void __exit dev_exit(void)
{
if (adc_clock)
{
clk_disable(adc_clock);
clk_put(adc_clock);
adc_clock = NULL;
}
misc_deregister(&misc);
}
EXPORT_SYMBOL(ADC_LOCK);
module_init(dev_init);
module_exit(dev_exit);
MODULE_LICENSE("GPL");
上述程序的源码以后再作分析。