Fedora 14配置无线连接

89241542 2011-09-29

首先在Fedora 14安装无线网卡驱动

查看无线网卡设备型号:

输入命令:$ lspci -v

找到终端以下信息:

03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)

Subsystem: Foxconn International, Inc. Device e021

Flags: bus master, fast devsel, latency 0, IRQ 17

Memory at 9a400000 (64-bit, non-prefetchable) [size=16K]

Capabilities: <access denied>

Broadcom Corporation BCM43225就是无线网卡的型号。
在Broadcom官网(http://www.broadcom.com/support/802.11/linux_sta.php)下载驱动并编译安装(根据自己的系统去选择32位还是64位)

安装步骤:

(1) 卸载冲突模块
输入命令:
$ sudo rmmod b43
$ sudo rmmod ssb
$ sudo rmmod wl

(2)屏蔽冲突模块
输入命令:
$ echo  "blacklist ssb" >> /etc/modprobe.d/blacklist
$ echo  "blacklist b43" >> /etc/modprobe.d/blacklist

(3)编译安装
切换到下载(找到刚才下载的驱动文件)目录:cd 下载
输入命令(把驱动文件解压到指定的目录):$ tar <font size="2">xf </font><span style="FONT-FAMILY: Consolas, 'Bitstream Vera Sans Mono', 'Courier New', Courier, monospace"><font size="2"><span>hybrid-portsrc_x86_64-v5_100_82_38.tar.gz</span><span> -C ../apps/wlan_drive/</span></font></span>
输入命令:
$ cd ../apps/wlan_drive
$ make
$ uname -r
终端将输出:2.6.35.6-45.fc14.x86_64
sudo cp -rf wl.ko /lib/modules/<span>2.6.35.6-45.fc14.x86_64</span>/kernel/drivers/net/wireless
$ sudo depmod
$ sudo modprobe wl

现在检验以下驱动是否安装成功:
输入:[zhoujh@alexzhou ~]$ lsmod | grep wl
wl                   2555141  0 
lib80211                5095  2 lib80211_crypt_tkip,wl

此时输入:lspci -v
终端将会输出:
03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01)
Subsystem: Foxconn International, Inc. Device e021
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 9a400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: wl

OK,现在你将看到你的本本无线信号的灯亮啦~~~

相关推荐

ganyouxianjava / 0评论 2012-05-31